NanpingWater-based universal adhesive

Features include low usage, high bonding strength, no flow at high temperatures, no brittleness at low temperatures, no loss of adhesion, good transparency, and never yellowing. It completely solves the problems encountered with solvent-based chloroprene universal adhesive, such as short shelf life, glue stringing during application, severe air pollution, softening and peeling at high temperatures, and loss of adhesion and falling off at low temperatures.

Category：

NanpingSuper Glue

+86 13609676233

Inquiry

Product description

Environmental Protection: This product is an environmentally safe universal adhesive using deionized water developed with the latest scientific technology as the medium. The adhesive contains no organic solvents, is non-toxic and odorless.

Safety: No pollution, no corrosion, non-flammable.

Better Performance: Economical usage, high bonding strength, no flow at high temperatures, no brittleness at low temperatures, no loss of adhesion, good transparency, and never yellows. It completely solves the problems of solvent-based chloroprene universal adhesives such as short shelf life, stringing during application, severe air pollution, softening and debonding at high temperatures, and loss of adhesion at low temperatures. The advent of water-based universal adhesive is a major revolution in transforming solvent-based chloroprene universal adhesives. It eliminates your explosion hazards. The water-based environmentally safe universal adhesive is suitable for bonding various boards (plywood, particleboard, fiberboard, bamboo residue board, composite board, etc.), aluminum-plastic panels, PVC panels, fireproof boards, metals, plastics, leather, rubber, and more.

Usage Method: (Same as solvent-based chloroprene universal adhesive):

Surface treat both bonding surfaces by removing stains, oil, moisture, and sanding if necessary.

Apply adhesive on both or one side of the objects to be bonded. For non-absorbent objects, apply adhesive on both sides. After a short wait (about 10-20 minutes depending on temperature and humidity at the site), when the adhesive feels very sticky to the touch but does not stick to the fingers (after the adhesive layer becomes transparent), bonding can be performed. For absorbent objects, apply adhesive on one side and bond immediately.

When bonding, press from one side of the objects to be bonded towards the other side, then use a rubber hammer or wooden hammer to evenly tap and secure. Use on the same day and move in on the same day; the best effect is achieved after 5 days.

Technical Specifications:

Composition: Polymer-modified chloroprene rubber

Appearance: Milky white or slightly yellow liquid colloid

Viscosity: 20000-60000 mPa.s (Rotational viscometer 4#×6 rpm/25℃ constant temperature)

Solid Content: 50-56%

pH Value: 5-6

Open Time: 15-30 minutes (min)

Adhesive Application Amount: 80-120 g/m2

Shear Strength: >15 kg/m2

Weather Resistance Temperature: No flow at 80°C above zero, no loss of adhesion at -25°C below zero

Packaging: 0.5kg, 1kg, 2kg plastic bottles; 5kg, 10kg, 50kg plastic buckets

Storage Period: Store sealed in a cool, dry place between 5°C and 35°C: 24 months (can continue to use if no caking or odor change occurs after expiration)

NanpingLigao Power Universal Glue 15L

NanpingNone