Tile adhesive
Tile adhesive

Tuvalu Tile adhesive

Tile back adhesive is a specialized interface treatment material used on the back of tiles. Its main function is to enhance the adhesion between the tile and the bonding layer (such as tile adhesive or cement mortar). It is especially suitable for tiles with low water absorption and smooth surfaces, such as glazed tiles, large slab tiles, sintered stone, and marble.

Category:

TuvaluTile Back Adhesive

admin@gdslg.com

Inquire

Product Description

Tile back adhesive is a specialized interface treatment material used on the back of tiles. Its main function is to enhance the adhesion between the tile and the bonding layer (such as tile adhesive or cement mortar), especially suitable for tiles with low water absorption and smooth surfaces, such as glazed tiles, large slab tiles, sintered stone, and marble.

Usage Instructions
1. Clean the back of the tile: ensure it is free of dust, oil stains, and release agents.
2. Apply the back adhesive evenly: use a brush or roller to cover the entire back surface evenly, avoiding any missed or spotty application.
3. Dry: wait for the back adhesive to become transparent (generally 12 hours, refer to product instructions for specifics).
4. Use with tile adhesive: lay tiles normally using tile adhesive or cement mortar.

Precautions
1. Do not dilute with water.
2. Cannot replace waterproofing: if waterproofing is needed, a waterproof layer must be applied first, then the back adhesive.
3. Not recommended for floor tiles: unless the product explicitly states "suitable for both wall and floor."
4. Recommended application temperature is above 5℃.
 

previous page:

Tuvalunone

Tuvalunone

: next page